Category Archives: Vaping
Defcon wrap

So I got an iTaste MVP mod. I got the silver color version and found the finish ok.  I wanted some more personality and looked around for some custom wraps, there were some cool ones but none struck me as me. So I took the DEFCON logo bought some inkjet sticker sheets and made my own skin.

DEFCON patterned iTaste MVP.

DEFCON patterned iTaste MVP.

 

Here are some advices:

1.Get the right type of paper.
a) Make sure its the thin type not the thicker paper type. The thicker it is its more difficult to wrap around the corners.
b) Also get some UV protective adhesive sheets. You can buy some “make your own sticker” paper that has this extra sheet.

2.The voltage/wattage window square is really difficult to cut. Practice on some throwaway paper to make sure.

The way I did it was:

1) printed the pattern on the thinner “make your own sticker” paper. (I think it actually was called , “make your own label” paper)

2) then wrapped the MVP with the printed pattern.

3)carefully carved out the voltage/wattage window.

4) to remove air bubbles use a sewing needle to pop the bubble.

5) Wrap the whole MVP with the thin UV protective coat sheet.

Start vaping.

 

Here is the pattern: DEFCON pattern
(right click “save linked file”)